Subsequent Work

1. Install DME control unit holder and DME control unit.

   > 247019 - REMOVING AND INSTALLING DME CONTROL UNIT

2. Secure coolant reservoir.

   > 194019 - REMOVING AND INSTALLING COOLANT RESERVOIR (R4)

3. Install wiper link.

   > 921919 - REMOVING AND INSTALLING WIPER LINK

4. Install front strut.

   > 408619 - REMOVING AND INSTALLING FRONT STRUT

5. Installing engine cover (design cover).

   > 108319 - REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (R4)

6. Install centre underbody cover.

   > Refer to appropriate service information

7. Install front underbody cover.

   > Refer to appropriate service information

8. Connect the battery.

> 270619 - REMOVING AND INSTALLING VEHICLE ELECTRICAL SYSTEM BATTERY