Installing Wire Harness For Dashboard

NOTIFICATION 

Incorrect handling of wire harness 

• Risk of damage to lines 

  → The wire harness contains all airbag lines, antenna lines and optical waveguides.

  → The wire harness must not be separated and is always replaced as a complete wire harness when carrying out extensive repairs.

  → If individual lines are damaged, shut off these lines and install new lines. Route the new lines along the wire harness and secure them to the wire harness.

NOTIFICATION 

Incorrect handling of optical waveguides 

• Risk of damage to optical waveguide 

  → Observe the requirements for working with and installing optical waveguides.

1. Installation is performed in reverse order.