Subsequent Work
- Install centre console.
> 68171900 REMOVING AND INSTALLING CENTRE CONSOLE
Information
If servo motors were replaced or work was performed on the flap mechanism, the end positions of the servo motors must be taught.
- Teach end positions of servo motors.
- 2.1 Connect the PIWIS Tester to the vehicle and switch on the PIWIS Tester.
- 2.2 Switch on ignition.
- 2.3 Start diagnostics.
- 2.4 Select "Air conditioning" control unit.
- 2.5 Select the "Maintenance/repairs" tab.
- 2.6 Select the "Teach and check Hap servo motors" menu item and press F12 to continue.
- 2.7 Follow the instructions on the Tester.