Removing Drive Belt For Air-Conditioning Compressor

WARNING: This page is about a different variant/trim than selected.

Use chalk or a felt-tip pen to mark the rolling direction of the drive belt for the air-conditioning compressor for re-installation.
Slacken drive belt for air-conditioning compressor -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drive belt for air-conditioning compressor

2.1 Remove cover on the tensioning device.
2.2 Loosen screw -1- by 1-1/2 turns.
2.3 To slacken the drive belt for the air-conditioning compressor -4- , swivel the tensioning device -3- clockwise at the Torx splines -2- using a TORX T55 socket wrench. -Arrow-
2.4 Remove drive belt for air-conditioning compressor -4- .