LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (13 Engine - Crank Drive, Pistons 3.0L -- 9YA - Cayenne (9YA)) >> WM, 131004 Measuring Pistons (Includes Measuring Cylinder Bore) (V6 Turbo) >> Measuring Cylinder Bore

Measuring Cylinder Bore

WARNING: This page is about a different variant/trim than selected.
  1. Using the cylinder gauge VAS 6078,  take measurements as shown > Diagram for measuring cylinder bore  at three points in the cylinder, crosswise in transverse direction A  and in longitudinal direction B  .
G15208475Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Diagram for measuring cylinder bore

Cylinder bore New in mm Maximum permitted deviation from nominal measurement in mm Note
Nominal measurement 84.510 ± 0.005 0.08 Measure cylinder bore depth of 50 mm.
scientia non olet · About LEMON Manuals