LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (37 Automatic Transmission - Actuator, Housing 3.0L -- 9YA - Cayenne (9YA)) >> WM, 373819 Removing And Installing Transmission Support >> Installing Transmission Support

Installing Transmission Support

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Observe installation position according to the marking.
    2. 1.2 Emergency release cable to transmission support:

      > Tightening torque 9 Nm (6.5 ftlb.) 

    3. 1.3 Nuts securing transmission mount to transmission support:

      > Tightening torque 20 (15 ftlb.) Nm 

    4. 1.4 Screws securing transmission support to body:

      > Tightening torque 55 Nm (41 ftlb.) 

scientia non olet · About LEMON Manuals