LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (37 Automatic Transmission - Actuator, Housing 3.0L -- 9YA - Cayenne (9YA)) >> WM, 370819 Removing And Installing Selector Support >> Installing Support

Installing Support

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Align selector lever support lengthwise using centring fin and crosswise via contact surfaces.
    2. 1.2 Screws securing selector support to body:

      > Tightening torque 8 (6 ftlb.) Nm 

scientia non olet · About LEMON Manuals