Electric Machine
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Fastening screws for transmission housing cover at high-voltage connection for electric motor | Item 3 | Tightening torque | 9 Nm (6.5 ftlb.) | |
|
Cover for high-voltage connection for electric motor |
||||
| Fastening screw for transmission housing cover at high-voltage connection for electric motor | Item 2 | Tightening torque | 4 Nm (3 ftlb.) | |
|
Cover for high-voltage connection for electric motor |
||||
| Fastening screws for high-voltage line from power electronics to electric motor at electric motor | Item 1 | Tightening torque | 21 Nm (15 ftlb.) | |
|
Electric motor |
||||
| Fastening screws for high-voltage line from power electronics to electric motor holder at electric motor | Item 3 | Tightening torque | 7 Nm (5 ftlb.) | |
|
Electric motor |
||||
| Fastening screws securing torque converter to electric motor | Item 1 | Tightening torque | 62 Nm (46 ftlb.) | |
|
Torque converter screws |
||||
| Fastening screws securing electric motor to automatic transmission | Item 1, 5, 3 | Initial tightening | 12 Nm (9 ftlb.) | |
|
First initial tightening for screws for electric motor |
||||
| Fastening screws securing electric motor to automatic transmission | Item 1, 2, 3, 4, 5 | Final tightening | 24 Nm (18 ftlb.) | |
|
Second initial tightening for screws for electric motor |
||||
| Fastening screws securing electric motor to automatic transmission | Item 6, 7, 8, 9, 10, 11, 12, 13 | Final tightening | 24 Nm (18 ftlb.) | |
|
Final tightening for screws for electric motor |
||||
| Fastening screws securing heat shield to electric motor | Item 1 | Tightening torque | 12 Nm (9 ftlb.) | |
|
Heat shield |
||||
| Fastening screws securing side heat shield to electric motor | Item 1 | Tightening torque | 8 Nm (6 ftlb.) | |
|
Heat shield |
||||
| Fastening screws securing temperature sensor to electric motor | Item 2 and 3 | Tightening torque | 6 Nm (4.5 ftlb.) | |
|
Temperature sensor |
||||
| Fastening screws securing rotor position sensor to electric motor | Item 2 to 5 | Tightening torque | 7 Nm (5 ftlb.) | |
|
Rotor position sensor |
||||