LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (40 Wheel Suspension Front Drive Shaft 3.0L -- 9YA - Cayenne (9YA)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar (PDCC) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect 48-volt vehicle electrical system.

    > Work instruction for 48 V vehicle electrical system 

  2. Remove front wheels.

    > WM, 440519 REMOVING AND FITTING WHEEL

  3. Remove front-axle support.

    > Removing and installing front-axle support 

  4. Remove connecting link for anti-roll bar.

    > 407819 REMOVING AND INSTALLING CONNECTING LINK FOR ANTI-ROLL BAR