Preliminary Work

WARNING: This page is about a different variant/trim than selected.

Loosen screw on drive shaft

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drive shaft screw
1. 1.1 Pull off hub cap -2- .
2. 1.2 Loosen screw on drive shaft
Remove brake disc
> 465019 REMOVING AND INSTALLING FRONT BRAKE DISC
Loosen upper trailing arms -1 and 2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Upper trailing arms on wheel bearing housing
1. 3.1 Unscrew nut -3- and counter at screw -4- at the same time.
2. 3.2 Remove screw -4- from wheel bearing housing -5- .
3. 3.3 Lift both trailing arms -1 and 2- up out of the wheel bearing housing -5- .
Remove front speed sensor
> 451119 REMOVING AND INSTALLING FRONT SPEED SENSOR