Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Install front brake disc.
> Removing and installing front brake disc
Install brake calliper.
> Removing and installing front brake calliper
Fit screw on drive shaft -I- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drive shaft screw
1. 3.1 Replace screw for drive shaft
2. 3.2 Screw in and tighten new screw on drive shaft
  > Initial tightening 200 Nm (148 ftlb.)
  
  > Final tightening + 180°
3. 3.3 Fit hub cap -2- .