LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (20 Fuel Supply, Actuator 3.0L -- 9YA - Cayenne (9YA)) >> WM, 203819 Removing And Installing Supply Line (V6 Turbo) >> Preliminary Work >> Preliminary Work - Section From Engine To High-Pressure Pump

Preliminary Work - Section From Engine To High-Pressure Pump

WARNING: This page is about a different variant/trim than selected.
  1. Relieve fuel pressure in the system.
    G15241181Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fuel pump fuse

    1. 1.1  Remove cover from fuse carrier A in the engine compartment at the front right.
    2. 1.2  Pull out the fuse -1-  for the fuel pump.
    3. 1.3  Start the engine, wait until it cuts out and then re-insert the fuse
  2. Remove air cleaner housing.

    > Removing and installing air cleaner housing