Preliminary Work
WARNING: This page is about a different variant/trim than selected.
WARNING:
Danger of injury and damage from brake fluid!
→ Store brake fluid in suitable, labelled containers only
→ Wear protective gloves and goggles
→ In the event of contact (eyes or skin), wash immediately with water
→ In the event of contact with paint surfaces, wash off immediately with water - do not wipe off
- Poisonous if swallowed!
- Irritation and damage to skin
- Avoid contact with paint surfaces
→ Store brake fluid in suitable, labelled containers only
→ Wear protective gloves and goggles
→ In the event of contact (eyes or skin), wash immediately with water
→ In the event of contact with paint surfaces, wash off immediately with water - do not wipe off
- Remove cowl panel cover.
> Removing and installing cowl panel cover
- Drain the brake fluid reservoir.
- 2.1 Unscrew cap on brake fluid reservoir.
- 2.2 Extract brake fluid from brake fluid reservoir using a syringe.
- 2.3 Screw on cap on brake fluid reservoir.
- 2.4 Clean off any escaping brake fluid immediately using suitable cleaning aids.
Wash affected components again with water and dry them.