LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (15 Engine - Cylinder Head, Valve Drive 3.0L -- 9YA - Cayenne (9YA)) >> WM, 153919 Removing And Installing Camshaft Controller Actuator (V6 Turbo) >> Preliminary Work >> Installing Camshaft Controller Actuator

Installing Camshaft Controller Actuator

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace sealing ring on camshaft controller actuator.
    2. 1.2  Tighten screws for camshaft controller actuator.

      > Tightening torque 9 Nm (6.5 ftlb.)