Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Camshaft controller for outlet camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for outlet camshaft | Final tightening | + 35° | |||
| Camshaft controller for intake camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Camshaft controller for intake camshaft | Final tightening | + 35° |