LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (55 Lids, Flaps (Coupe) -- 9YB - Cayenne (9YB)) >> 5510 Front Lid Release >> WM, 551019 Removing And Installing Front Lid Release >> Installing Front Lid Release

Installing Front Lid Release

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Screw in fastening screws and tighten to > Tightening torque 2 Nm (1.5 ftlb.)  ↓.

scientia non olet · About LEMON Manuals