LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (72 Seat Frames (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 722619 Removing And Installing Cover For Backrest >> Removing Backrest Cover

Removing Backrest Cover

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disengage rubber straps -1-  and fold over tab -2-  on seat cover.
    G15240478Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tab

  2. Use a flat assembly wedge to release the locking lugs -Arrows-  and detach the seat cover on the backrest at the bottom -1-  from the backrest cover -2-  .
    G15240479Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seat cover on backrest, bottom

  3. Remove expanding clips -1-  .
    G15240480Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Expanding clips

    Information 

    Failure to release the locking lugs will result in high removal forces and will damage the seat cover on the backrest.

  4. Use a flat assembly wedge to release the locking lugs at the very bottom at the left and right and detach seat cover on backrest -1-  .

    > Distance A = 30 mm

    G15240481Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lowest locking lug securing seat cover to backrest cover

    1. 4.1 Loosen locking lug -1-  in the direction of the centre of the backrest. -arrow- 
      G15240482Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Locking lug

      Information 

      Failure to release the locking lugs will result in high removal forces and will damage the seat cover on the backrest.

  5. Release all other locking lugs -arrow-  using a flat assembly wedge and detach seat cover on backrest -1-  from the backrest cover all the way around.
    G15240483Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seat cover for backrest on backrest cover

    G15240484Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seat cover for backrest on backrest cover (also for integrated headrest)

    1. 5.1 Loosen locking lug -1-  in the direction of the centre of the backrest. -arrow- 
    G15240485Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Locking lug

  6. Loosen cover on headrest. (only for integrated headrest)
    1. 6.1 Fold cover inwards.
      G15240486Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Cover on headrest

    2. 6.2 Loosen locking mechanism on the clip.
      1. 6.2.1 Open up clips and press cover to the rear.
      G15240487Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Locking mechanism on clip

      G15240488Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Locking mechanism on clip (shown without cushion)

  7. Pull backrest cover -1-  at the bottom slightly to the rear and then remove it by pulling it downwards.
    G15240489Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Backrest cover