LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (68 Interior Equipment (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 680519 Removing And Installing Inner Door Entry Guard >> Removing Inner Door Sill Trims

Removing Inner Door Sill Trims

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

To prevent damage, use a suitable tool as a support during removal at accessible connection points.

  1. Unclip front inner door sill trim -1-  using a suitable tool -Arrows-  .
    G15238893Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front inner door sill trim

  2. Unclip rear inner door sill trim using a suitable tool -Arrows-  .
    G15238894Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear inner door sill trim

  3. Remove inner door sill trim -1-  .
    G15238895Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner door sill trim

    1. 3.1 Unclip inner door sill trim -1-  from the B-pillar trim panel by pulling it downwards -arrows A-  .
    2. 3.2 Unscrew inner door sill trim -1-  from the B-pillar trim panel inwards and remove it.
    3. 3.3 Guide seat belt -2-  out of the opening -B -  on the inner door sill trim -1-  .
    4. 3.4 Remove inner door sill trim -1-  .