LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (63 Bumper (Coupe) -- 9YB - Cayenne (9YB)) >> WM, 637019 Removing And Installing Trim Frame For Tailpipe Cover >> Installing Trim Frame For Tailpipe Cover

Installing Trim Frame For Tailpipe Cover

WARNING: This page is about a different car, the 2023 Porsche Cayenne, 2022 Porsche Cayenne, 2021 Porsche Cayenne, and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw securing trim frame for tailpipe cover to rear bumper: > Tightening torque 3.5 Nm (2.6 ftlb.) 

scientia non olet · About LEMON Manuals