Installing Crankcase Cover

1. 2.1  Remove residual sealant.
2. 2.2  Clean sealing faces with primer Loctite 7515. 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Applying sealant on crankcase cover

1. 3.1  Remove residual sealant.
2. 3.2  Clean sealing faces with primer Loctite 7515. 
3. 3.3  Replace O-ring.
4. 3.4  Apply liquid sealant Loctite 5970-BM -1-  on the crankcase cover.

Fig 1: Crankcase Cover Screws Tightening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankcase cover

1. 4.1  Fit crankcase cover uniformly on the oil guide housing and crankcase.
2. 4.2  Screw in screws -1 to 10-  as far as they will go by hand.
3. 4.3  Tighten screws in the sequence -1 to 10-  .

   > Tightening torque 9 Nm (6.5 ftlb.)