Subsequent Work
WARNING:
Highly inflammable or explosive materials
- Danger of fire or explosion
- → Avoid contact with hot parts or sources of ignition.
- → Use suction to remove ignitable vapors.
- → Attach warning sign in a clearly visible position.
- → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
- → Secure collection containers/vessels to prevent them from tipping over.
WARNING:
Caustic fluids
- Danger of chemical burns
- → Wear personal protective gear.
- → Ensure that there is good ventilation.
- → Avoid contact with caustic fluid.
- → If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.
- > 9705 - Measuring adapter -1-
must be removed.
Fuel measuring adapter (shown on Porsche Panamera)
- 1.1 Release and disconnect plug-in coupling. Collect emerging fuel.
- 1.2 > 9705 - Measuring adapter -1- must now be removed.
- 1.3 Connect fuel low-pressure line. Check that the plug-in coupling is fitted securely.
- 1.4 Remove cloths.
- Fit cover for fuse carrier.
- Switch on ignition (fuel pump is activated briefly) and visually inspect the fuel line for leaks.
- Switch off the ignition.
- Remove the charger.
- Remove warning sign.
- Install engine cover (design cover).
> 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
> 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V8 BITURBO)