Installing Mounting Saddle
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Tighten brake booster to the pedals.
> Tightening torque 25 Nm (19 ftlb.)
> 477019 Removing and installing brake booster - section on "Installing"
- 1.2 Tighten nuts securing mounting saddle to firewall.
> Tightening torque 8 Nm (6 ftlb.)
- 1.3 Tighten screw securing mounting saddle to retaining frame.
> Tightening torque 20 Nm (15 ftlb.)
- 1.1 Tighten brake booster to the pedals.