LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (13 Engine - Crank Drive, Pistons 3.0L -- 9YA - Cayenne (9YA)) >> WM, 137319 Removing And Installing Belt TENSIONER (Air-Conditioning Compressor) (V6 Turbo) >> Installing Belt TENSIONER (Air-Conditioning Compressor) >> Installing Belt Tensioner (V6 Turbo)

Installing Belt Tensioner (V6 Turbo)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
  1. 1.1  Tension the drive belt first before tightening the belt tensioner screw to the prescribed tightening torque.

    > Tightening torque 25 Nm (19 ftlb.) 

scientia non olet · About LEMON Manuals