LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (13 Engine - Crank Drive, Pistons 3.0L -- 9YA - Cayenne (9YA)) >> WM, 134819 Removing And Installing Crankshaft (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install sprocket for oil pump.

    > Removing and installing oil pump (V6 Turbo) 

  2. Install crankcase cover.

    > Removing and installing front crankcase cover (V8 biturbo) 

  3. Install pistons.

    > Removing and installing pistons 

  4. Install timing chain.

    > 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS

    > 158419 REMOVING AND INSTALLING ACTUATOR FOR CAMSHAFT

  5. Install engine.

    > Removing and installing engine 

  6. Loosen engine from assembly support.

    > 100113 SECURING ENGINE ON ASSEMBLY SUPPORT (V6 TURBO)

  7. Fill in engine oil.

    > Draining and filling in engine oil 

scientia non olet · About LEMON Manuals