Preliminary Work
WARNING: This page is about a different variant/trim than selected.
WARNING:
Hot fluid
- Danger of scalding
- → Let the fluid cool down.
- → Wear personal protective gear.
- Remove cover for front underbody.
> WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
- If engine/transmission units are cold, start the vehicle briefly and drive a short distance (approx. 200 metres) at a speed of 20 to 30 km/h (12 to 18 mph) .
- Allow the engine/transmission unit to cool down to room temperature (about 20° to 25° Celsius).
- Visually inspect the engine/transmission unit for leaks.
- Position collection pan and have special tool ready.