Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cardan shaft to rear axle differential flange | Screw, M10 x 45 | Initial tightening | 50 Nm (37 ftlb.) | ||
| Cardan shaft to rear axle differential flange | Screw, M10 x 45 | Final tightening torque angle | 90° | ||
| Cardan shaft centre bearing to body | Screw, M8 x 25 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Heat shield to body | Hexagon nut | Tightening torque | 2.1 Nm (1.6 ftlb.) | ||
| Shield on vibration balancer | Screw M8 x 22 - replace | Tightening torque | 28 Nm (20.7 ftlb.) |