Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear axle differential to rear axle carrier, front | Screw, M14 x 1.5 x 120 - replace screw | Initial tightening | 130 Nm (96 ftlb.) | ||
| Rear axle differential to rear axle carrier, front | Screw, M14 x 1.5 x 120 - replace screw | Final tightening torque angle | 180 Grad | ||
| Rear axle differential auxiliary bearing in rear axle carrier | Can only be screwed using upper hexagon on bearing! | Tightening torque | 20 Nm (15 ftlb.) | ||
| Rear axle differential to rear axle carrier, rear | Screw, M12 x 1.5 x 110 - replace screw | Initial tightening | 70 Nm (52 ftlb.) | ||
| Rear axle differential to rear axle carrier, rear | Screw, M12 x 1.5 x 110 - replace screw | Final tightening torque angle | 180 Grad |