Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Hybrid only:
Install high-voltage line from power electronics to electric motor.

> 279319 REMOVING AND INSTALLING HIGH-VOLTAGE LINE FROM POWER ELECTRONICS TO ELECTRIC MOTOR (R4 AND V6)
Secure emergency release.
> 371619 REMOVING AND INSTALLING OPERATING CABLE FOR EMERGENCY RELEASE
Secure ATF cooler.
> 386019 REMOVING AND INSTALLING ATF COOLER
Secure drive shafts.
> 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT
Install the cardan shaft.
> 393519 REMOVING AND INSTALLING REAR CARDAN SHAFT
Install catalytic converter(s).
> 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER (V6 MONOTURBO)

> 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER (V6 BITURBO)
Vehicles without particle filter:
Install primary catalytic converter(s).

> 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (V6 MONOTURBO)

> 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (V6 BITURBO)
Vehicles with particle filter:
Install particle filter (with catalytic converter).

> 267419 REMOVING AND INSTALLING PARTICLE FILTER (WITH CATALYTIC CONVERTER) (V6 MONOTURBO)

> 267419 REMOVING AND INSTALLING PARTICLE FILTER (WITH CATALYTIC CONVERTER) (V6 BITURBO)
Install power-steering gear.
> 489019 REMOVING AND INSTALLING POWER-STEERING GEAR
Install front-axle support.
> 400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT
Fill up coolant.
> 193817 DRAINING AND FILLING COOLANT (HIGH-TEMPERATURE COOLING SYSTEM)