Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| PDCC ground line to longitudinal member (front axle) |
Ground pin, M10 |
Tightening torque |
16 Nm (12 ftlb.) |
|
|
| Anti-roll bar clamps to front-axle carrier (PDCC) |
Hexagon-head bolt, M10 x 45 |
Tightening torque |
55 Nm (41 ftlb.) |
|
|