LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 57 (40 Wheel Suspension Front Drive Shaft 4.0L -- 9YA - Cayenne (9YA)) >> WM, 405019 Removing And Installing Wheel Bearing Housing >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install front brake disc.

    > Removing and installing front brake disc 

  2. Install brake calliper.

    > Removing and installing front brake calliper 

  3. Fit screw on drive shaft -1-  .
    G15259548Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drive shaft screw

    1. 3.1 Replace screw for drive shaft -1-  .
    2. 3.2 Screw in and tighten new screw on drive shaft -1-  .

      > Initial tightening 200 Nm (148 ftlb.) 

      > Final tightening + 180° 

    3. 3.3 Fit hub cap -2-  .
scientia non olet · About LEMON Manuals