Subsequent Work
WARNING: This page is about a different variant/trim than selected.
Information
The > 9900 - PIWIS Tester 3 instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations can occur with later software versions.
- Install brake shoes.
- Cancel brake pad change mode using > 9900 - PIWIS Tester 3
.
- 2.1 Select Brake electronics (PSM, incl. parking brake) in the control unit overview.
- 2.2 Drive links/checks must now be selected.
- 2.3 Select Cancel brake pad change mode .
- Adjust and calibrate parking brake shoes.
- Activate the parking brake using the button in the passenger compartment.