Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Control mechanism to transmission | Aluminum screws, M6 x 59 (14 ea.) and M6 x 20 (4 ea) - replace screws - observe tightening sequence! | Tightening torque | 8 Nm (6 ftlb.) | ||
| Connector housing to transmission | Screw | Tightening torque | 7.5 Nm (5.5 ftlb.) | ||
| Pulse memory to transmission | Aluminum screw, M6 x 28 - replace screws | Initial tightening | 4 Nm (3 ftlb.) | ||
| Pulse memory to transmission | Aluminum screw, M6 x 28 - replace screws | Final tightening torque angle | 45 Grad |