LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 49 (38 Automatic Transmission Gears Control 3.0L -- 9YA - Cayenne (9YA)) >> WM, 386219 Removing And Installing Line For ATF Cooling >> Installing Line For ATF Cooling

Installing Line For ATF Cooling

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Tighten screw on line for ATF cooling.

      > Tightening torque 20 Nm (15 ftlb.)