LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 46 (27 Starter, Power Supply, Cruise Control 4.0L -- 9YA - Cayenne (9YA)) >> WM, 270719 Removing And Installing 48-Volt Auxiliary Battery >> Installing 48-Volt Auxiliary Battery

Installing 48-Volt Auxiliary Battery

WARNING: This page is about a different variant/trim than selected.

Observe specifications for handling 48-volt lithium-ion batteries.

> 2X00IN Handling specifications for 12 V/48 V lithium-ion batteries 

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening screws to > Tightening torque 8 Nm (6 ftlb.)  .

    Tighten fastening nuts to > Tightening torque 8 Nm (6 ftlb.)  .

    Tighten fastening screws on cover for 48-volt additional battery to > Tightening torque 4.5 Nm (3.3 ftlb.)  .

scientia non olet · About LEMON Manuals