LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 42 (43 Leveling System, Air Suspension, Damper Control 3.0L -- 9YA - Cayenne (9YA)) >> WM, 430117 Bleeding And Filling The Levelling System >> Bleeding And Filling The Levelling System >> Releasing Air From One Air Spring

Releasing Air From One Air Spring

WARNING: This page is about a different variant/trim than selected.

Information 

This function is used for bleeding when working on an air spring or the lines of an air spring (without any loss of system air). The air from up to two air-spring struts can be stored in the pressure accumulator.

  1. > 9900 - PIWIS Tester 3  must be connected to the vehicle. Then, start > 9900 - PIWIS Tester 3  .
  2. Using > 9900 - PIWIS Tester 3  , select Chassis control > Maintenance/repairs > Replacement work on the air spring system > Replacement of an air spring > Bleeding an air spring 
scientia non olet · About LEMON Manuals