Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Rear strut to body | Item 1: Hexagon-head bolt, M10 x 42 | Initial tightening | 50 Nm (36.9 ftlb.) | ||
| Rear strut to body | Item 1: Hexagon-head bolt M10 x 42 | Final tightening | + 45 (33 ftlb.) ° | ||
| strut left to strut right | Item 2: M8 internal multipoint screw M8 x 16 | Tightening torque | 25 Nm (18.5 ftlb.) (18.4 ftlb.) | ||
| Rear strut to body | Item 4: Hexagon-head bold M10 x 35 | Tightening torque | 49 Nm (36.1 ftlb.) | ||
| Rear axle housing to body | Hexagon-head bolt, M14 x 1.5 x 145/always replace bolts following removal! | Initial tightening | 130 Nm (96 ftlb.) | ||
| Rear axle housing to body | Hexagon-head bolt, M14 x 1.5 x 145/always replace bolts following removal! | Final tightening | + 180° |