Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Steering tie rod on rear axle beam/servo motor for rear axle steering (toe eccentric) | Item 4 Eccentric screw, M12 x 1.5 with eccentric washer and hexagon nut | Tightening torque | 90 Nm (66 ftlb.) (66.4 ftlb.) | ||
| Steering tie rod to wheel bearing housing | Item 5: Hexagon-head bolt M14 x 1.5 x 100/Always replace screws following removal! | Initial tightening torque | 100 Nm (73.8 ftlb.) | ||
| Front axle carrier on rear body | Item 5: Hexagon head bolt M14 x 1.5 x 100/Always replace bolts following removal! | Final tightening torque | + 180 (133 ftlb.) ° |