LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (19 Engine - Cooling 4.0L -- 9YA - Cayenne (9YA)) >> WM, 196119 Removing And Installing Coolant Pipe (Engine) (V8 Turbo) >> Installing Coolant Pipe (Engine) >> Installing Coolant Pipe Switching Valve (Engine Control Unit For Transmission Oil Preheating)

Installing Coolant Pipe Switching Valve (Engine Control Unit For Transmission Oil Preheating)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace gasket.
    2. 1.2  Screw in and tighten screws.

      > Tightening torque 9 Nm (6.5 ftlb.) 

scientia non olet · About LEMON Manuals