Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Control box for bypass flap | M6 nut | Tightening torque | 8 Nm (6 ftlb.) | ||
| Total control rod adjustment range | Setpoint value | 12 mm | +/- 0.5 mm | ||
| Control rod adjustment range | with 200 mbar vacuum | Setpoint value | 4 mm | +/- 0.3 mm | |
| Lock nut for control box control rod | M6 | Tightening torque | 8 Nm (6 ftlb.) |