LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (21 Exhaust Gas Turbocharging 4.0L -- 9YA - Cayenne (9YA)) >> WM, 213919 Removing And Installing Moulded Hose (V8 BITURBO) >> Removing Moulded Hose >> Removing Moulded Hose (Bottom)

Removing Moulded Hose (Bottom)

WARNING: This page is about a different variant/trim than selected.
CAUTION: Hot components 
  • Risk of burns 
    1. → Let hot components cool down.
    2. → Wear personal protective gear.

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

  1. Remove -1-  moulded hose.
    G15258871Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Moulded hose, bottom

    1. 1.1  Loosen -2-  screw clamps.
    2. 1.2  Disconnect and remove -1-  moulded hose.
scientia non olet · About LEMON Manuals