LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (21 Exhaust Gas Turbocharging 4.0L -- 9YA - Cayenne (9YA)) >> WM, 213019 Removing And Installing Turbocharger (V8 BITURBO) >> Subsequent Work >> Subsequent Work For Right Turbocharger

Subsequent Work For Right Turbocharger

WARNING: This page is about a different variant/trim than selected.
  1. Install pressure pipe at the right.

    > Removing and installing pressure pipe (V8 biturbo) 

  2. Install right intake pipe.

    > Removing and installing intake manifold (V8 biturbo) 

  3. Vehicles without particle filter:

    Install primary catalytic converter at the right.

    > Removing and installing primary catalytic converter (V8 biturbo) 

  4. Vehicles with particle filter:

    Install particle filter (with catalytic converter) at the right.

    > 267419 REMOVING AND INSTALLING PARTICLE FILTER (WITH CATALYTIC CONVERTER)

  5. Install oxygen sensor upstream of catalytic converter at the right.

    > Removing and installing oxygen sensor upstream of catalytic converter (V8 biturbo) 

  6. Install intermediate piece.

    > WM, 505219 REMOVING AND INSTALLING INTERMEDIATE PIECE

  7. Checking engine-oil level.

    > Checking engine-oil level 

  8. Check engine coolant level.

    > 190101 CHECKING COOLING SYSTEM