LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (26 Exhaust System 4.0L -- 9YA - Cayenne (9YA)) >> WM, 267219 Removing And Installing Exhaust Temperature Sensor (V8 BITURBO) >> Removing Exhaust Temperature Sensor >> Removing Exhaust Temperature Sensor At The Right

Removing Exhaust Temperature Sensor At The Right

WARNING: This page is about a different variant/trim than selected.
CAUTION: Hot components 
  • Risk of burns 
    1. → Let hot components cool down.
    2. → Wear personal protective gear.
  1. Remove exhaust temperature sensor -1-  .
    G15259116Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Exhaust temperature sensor, right

    1. 1.1  Mark installation position of exhaust temperature sensor -1-  .
    2. 1.2  Cut tie-wrap -2-  .
    3. 1.3  Release and disconnect cable plug on fuel pressure sensor -3-  .
    4. 1.4  Unscrew exhaust temperature sensor -1-  and guide it towards the cable plug -4-  .
    5. 1.5  Release and disconnect cable plug -4-  and unclip it from the holder -5-  .
    6. 1.6  Remove exhaust temperature sensor -1-  .
scientia non olet · About LEMON Manuals