Installing Centre Tailpipe
WARNING: This page is about a different variant/trim than selected.
- Installation is performed in reverse order. Pay particular attention to the following:
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Tailpipe, centre
- 1.1
Align tailpipes -2-
according to the marking.
- 1.2
Tighten the screws -1-
.
> Tightening torque 30 Nm (22 ftlb.)
- 1.3
Loosen and tighten screws -1-
again.
> Tightening torque 30 Nm (22 ftlb.)