Charging Lithium-Ion Battery
NOTIFICATION
Do not connect charging cables/jump leads directly to the vehicle battery.
→ Always connect charging cables/jump leads to the external power supply for jump-lead starting.
Information
- When working or carrying out tests on the vehicle or when the vehicle is in the workshop, a battery charger with a current rating of at least 90 A must be connected.
- As soon as the vehicle is unlocked, e.g. the vehicle is in the workshop or salesroom, it must be trickle-charged using a battery charger.
Information
The lithium-ion battery must be charged with a charge voltage of 14.4 volts.
Before charging the battery, check setting parameters of the charger and change them if necessary. Follow the operating instructions for the charger to do this.
Connect battery charger with at least>current 90 A to vehicle battery.
Charge lithium-ion battery until the charging current is < 5 A.
Use > VAS 5908 - battery charger 90 A .
Open protective cover on the positive terminal for jump-lead starting.
First, connect the positive cable from the charger to the positive terminal.
Connect the negative cable from the charger to the ground point for jump-lead starting.
Read operating instructions for the charger.
Switch off all loads.
Switch on the charger.