LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (24 Fuel System - Electronic Injection 3.0L -- 9YA - Cayenne (9YA)) >> WM, 240919 Removing And Installing Fuel Pressure Sensor (Low-Pressure) (V6 Turbo) >> Installing Fuel Pressure Sensor (Low-Pressure)

Installing Fuel Pressure Sensor (Low-Pressure)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following.
    1. 1.1  Replace sealing ring on pressure sensor.
    2. 1.2  Tighten pressure sensor to > Tightening torque 20 Nm (15 ftlb.)  .
    3. 1.3  Move heat shield back to its correct position.
scientia non olet · About LEMON Manuals