LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (19 Engine - Cooling E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 197819 Removing And Installing Coolant Temperature Sensor (V6 Turbo) >> Installing Coolant Temperature Sensor >> Installing Coolant Temperature Sensor (Cylinder Housing)

Installing Coolant Temperature Sensor (Cylinder Housing)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace O-ring.
    2. 1.2 Tighten screw on coolant temperature sensor.

    > Tightening torque 9 Nm (6.5 ftlb.) 

scientia non olet · About LEMON Manuals