LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (19 Engine - Cooling E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 194519 Removing And Installing Additional Coolant Pump For Low-Temperature System (P1, P2) (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance 1 Tolerance 2
Nut bracket additional coolant pump low-temperature system (P1) without particle filter   Tightening torque 8 Nm    
Nut bracket additional coolant pump low-temperature system (P1) with particle filter   Tightening torque 8 Nm    
Nut bracket additional coolant pump low-temperature system (P2)   Tightening torque 8 Nm    
Nuts coolant pipes engine compartment left on body   Tightening torque 5 Nm    
Nut bracket coolant hoses   Tightening torque 5 Nm    
Nuts coolant pipes below left on body   Tightening torque 5 Nm    
Screw coolant pipes below left on body   Tightening torque 8 Nm    
Union nut securing differential pressure sensor connections to particulate filter   Tightening torque 45 Nm (33 ftlb.)