Subsequent Work
WARNING: This page is about a different variant/trim than selected.
- Install sound absorber on bumper -1-
.
Sound absorber on bumper
- Install side part of front air guide -1-
at the left and right.
Side part of front air guide
- Install front apron.
> 631519 REMOVING AND INSTALLING FRONT APRON
Information
If the component is replaced, perform adaptation using the PIWIS Tester.
- Perform adaptation. Follow the procedure on the Tester and comply with instructions.
- 4.1 Path: DME control unit --> Maintenance/repairs --> Adaptation