Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Spring strut to spring strut fork | Hexagon-head bolt, M12 x 95 and hexagon nut/always replace bolts and nuts following removal! | Initial tightening | 40 Nm (30 ftlb.) | ||
| Spring strut to spring strut fork | Hexagon-head bolt, M12 x 95 and hexagon nut/always replace bolts and nuts following removal! | Final tightening | + 180° | ||
| Supporting mount to piston rod, steel springs (conventional) | Hexagon nut, M12 x 1.5 | Tightening torque | 50 Nm (37 ftlb.) | ||
| Supporting mount to piston rod, steel springs (PASM) | Hexagon nut, M14 x 1.5 | Tightening torque | 60 Nm (44 ftlb.) | ||
| Aligning spring strut | Angle of bore on spring strut mount with respect to lug on spring strut fork | Angle | 90° |