LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (40 Wheel Suspension Front Drive Shaft 3.0L -- 9YA - Cayenne (9YA)) >> WM, 408519 Removing And Installing Front Spring Strut >> Technical Values

Technical Values

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance 1 Tolerance 2
Nuts on housing for external power connection Item 2 Tightening torque 3 Nm (2 ftlb.)    
G15288801Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Housing for positive terminal 
Fastening nut on external Item 2 Tightening 20 Nm (14.8    
power connection   torque ftlb.)    
G15288802Courtesy of PORSCHE CARS NORTH AMERICA, INC.

External power connection cover 
Spring strut to body Hexagon-head bolt, M8 x 34/always replace bolts following removal! Initial tightening 20 Nm (15 ftlb.)    
Spring strut to body Hexagon-head bolt, M8 x 34/always replace bolts following removal! Final tightening + 90°